ECCENTRIC AND CONCENTRIC REDUCERS FOR PIPE LINES
GENERAL AND SPECIAL PURPOSE PIPE FITTINGS
GENERAL AND SPECIAL PURPOSE PIPE FITTINGS
Prices may be reduced!
Contact us!
Short radius solid-drawn elbowsShort radius solid-drawn elbows
| Standard | Technical characteristics | Nominal Pressure, MPa | Material | Field of application |
| GOST 17375-2001 (type 2) R=1,5 DN | R=1,5 DN, DN = 50 ÷ 400mm | Up to 16 | Carbon and low alloy steel | Hot water and vapor pipelines |
| GOST 30753-2001 (type 2) R=1,0 DN | R=1,0 DN, DN =300, =500, =600mm | Up to 16 | Carbon and low alloy steel | Hot water and vapor pipelines |
| OST 34.10.699-97 | R=1,5 DN, DN = 40 ÷ 400mm R=1,0 Ду, DN =500, 600mm | Up to 4,0 | Carbon and low alloy steel | Atomic power stations and thermal stations pipelines |
| TU 1469-007-04606975-00 (TU 51-467-89) |
DN = 50 ÷ 250mm | 10 to 28 | Carbon and low alloy steel | Oil, gas and chemical sector |
| Technical requirements of manufacturing plants to geometry of GOST 17375-01 and GOST 30753-01 |
R=1,5 DN, DN = 50 ÷ 400mm R=1,0 DN, DN =300, =500, =600mm | Up to 16 | High alloy and stainless steel | Oil, gas and chemical sector |
| Short radius solid-drawn elbows acc. to technical requirements from welded pipe | R=1,0 DN, DN= 700, 800 | Up to 16 | Carbon and low alloy steel | Oil, gas and chemical sector |
(495) 268-01-65
info@eccentrik.ru
info@eccentrik.ru
Working hours:
Monday - Friday
8-00 - 20-00
Monday - Friday
8-00 - 20-00
